Search:

Type: Posts; User: HarryNZ

Search: Search took 0.00 seconds.

  1. Another query - does anyone know how the lower...

    Another query - does anyone know how the lower fairing frame mounts to the main frame - at the moment I have an air gap of about 40mm and a right angle bend.
  2. Startup did not happen. The tear-down is now...

    Startup did not happen. The tear-down is now complete. This may come back to bit me.
  3. Replies
    0
    Views
    334

    83 GPZ1100 rear shock past its use by.

    I have the rear shock off my 83 ZX1100A1 uni-shock and I would like to know if is re-buildable - has anyone done this before. Its a KYB-1231. I've tried to compress it, but no movement. I can hear...
  4. Replies
    1
    Views
    628

    83 GPZ1100A - rear mono shock - KYB-1231

    I have the rear shock off my 83 ZX1100A1 uni-shock and I would like to know if is re-buildable - has anyone done this before. Its a KYB-1231. I've tried to compress it, but no movement. I can hear...
  5. Replies
    1
    Views
    618

    83 GPZ1100 camshafts

    Hi, during the restoration tear down, I've eventually got the head off and the cams out. While measuring the lobes I find that the total lobe height across all 8 is between 36.30 and 36.36 (mm),...
  6. I’ve been working on the CB900f for a while, but...

    I’ve been working on the CB900f for a while, but now I waiting on some parts for that. So back to the GPZ.
    I want to get the bike running before a fully tear it down. So exhaust off, oil filter out,...
  7. I think I've found the reason for the funny diode...

    I think I've found the reason for the funny diode setup on the coils - a faulty neutral switch, permanent earth. cleaned, bench tested, reinstalled and function tested. All good. the Diode setup has...
  8. Sorry I've been busy on other stuff. I've...

    Sorry I've been busy on other stuff.
    I've followed the other side of the handle bar switch, Diode connection on one side, and it goes down to the Neutral switch, so it looks like the PO was...
  9. I called Jay @ Brisbane Fuel Injection services,...

    I called Jay @ Brisbane Fuel Injection services, and he turned up and sonic cleaned and bench tested the four injectors. 2 needed a second go in the sonic bath. Bench flow tested and pattern are now...
  10. ignition circuit

    I have another question - same bike - next to the throttle grip there is a auxiliary on/off switch. Adjacent to the ignition coils there are 2 tunnel diodes wired back to back (cathode to cathode)....
  11. thanks for that - I'll give it a jolly good...

    thanks for that - I'll give it a jolly good soaking tomorrow.
    I'm new to the fuel injection system on bikes and one being an early one seems to be fairly temperamental from all that I've read.
    ...
  12. 1983 GPZ1100A1 (ZX1100A1) - replacement fuel pump

    I'm about to start a new resto project on a 83 gpz1100, and I was hoping to get the bike running before tearing it down. First item of business, I need to replace the fuel pump as it is closed...
Results 1 to 12 of 13
Powered by vBulletin® Version 4.1.12
Copyright © 2019 vBulletin Solutions, Inc. All rights reserved.
Extra Tabs by vBulletin Hispano
All times are GMT +10. The time now is 10:22 PM.
vBulletin 4.0 skin by CompleteVB
Your continued use of this forum constitutes your acceptance of the Forum Rules and Terms and Conditions.