PDA

View Full Version : No Spark In ZZR250



Neo_nick
03-03-07, 03:59 PM
Hi Guys,
I recently did an engine change on my zzr250 which had been sitting around for a year or so - New engine oil, filter, spark plus etc are in but i am not able to start the engine!
The engine cranks over but i am getting no spark! i had a spare coil and replaced that still no spark, also changed igniter and i still have no spark!

Any other ideas - side stand switch or clutch switch wouldnt cause it to turn over but have no spark would it?

I beleive clutch switch is fine as when you put it in gear and pull clutch in it cranks and when you release it stops so that sounds normal to me.\
Side stand switch seems to be working fine i get connectivity from it

Anyone got any ideas for me to check out before i send it in to brighton kawasaki?

gordy37
17-12-12, 09:25 AM
hi neo-nick i also done an engine change on my zzr 250 and i got the same prob as you i have replace the cdi trye ether coils regulater changd all fuses cleand contacts but still have no spark

the mechanic
19-12-12, 11:17 AM
I would suggest to replace the crank sensor with the one from the old engine...

gordy37
05-01-13, 09:17 AM
is that the senser that sits next to the magneto the pick up senser mate ?